audio
Rubicon
100
Precision coaxial speaker with a 6” mica-filled polypropylene cone and santoprene surround for outstanding performance and weather resistance. A high quality dome tweeter with an adjustable mount reproduces the upper octaves of music while the audiophile grade crossover divides the music between the woofer and the tweeter.
- Power handling (continuous) - 100 watts
- Nominal impedance - 3 ohm
- Sensitivity - 92db SPL with 1 watt of power (2.83 volts) measured at a distance of 1 meter in free air
- Sold as a pair (includes two of what is shown in the image)
- (2) 6” coaxial drivers
- Neutrik Speakon connectors for reliable quick release wiring
- Dura-tech acoustically engineered composite enclosure for low resonance and light weight
- Collar mounting system fits 1.5” - 2.875” tubing for a secure fit without damage to the tower’s finish
Rubicon 125
Precision coaxial speaker system with a 6” woofer and a center mounted 1” tweeter. We have tuned the Rubicon 125 to replace the Rubicon 150 for 2008. The new center mounted soft dome tweeter delivers the same crisp upper octaves of music while the audiophile grade cross-over divides the music between the woofer and the tweeter for unparalleled sound quality. The woofer cone is made from mica-filled polypropylene and has a santoprene surround for outstanding performance and weather resistance. The best value available for a tower speaker.
- Power handling (continuous) - 125 watts
- Nominal impedance - 3 ohm
- Sensitivity - 92db SPL with 1 watt of power (2.83 volts) measured at a distance of 1 meter in free air
- Sold as a pair (includes two of what is shown in the image)
- (2) 6” high performance coaxial speakers
- Neutrik Speakon connectors for reliable quick release wiring
- Dura-tech acoustically engineered composite enclosure for low resonance and light weight
Rubicon 325
This is a very high output precision loudspeaker that features an 8” mid bass woofer and a coaxially mounted 1” long throw horn driver. The 325 delivers the loudest, clearest, most efficient use of power available in any tower speaker. The efficient design allows your amps to run at a lower rate of continuous power but will still deliver maximum volumes and accurate clarity. You can listen to these loudspeakers for hours at very high levels with no audio fatigue. An audiophile crossover is used to distribute the sound for unbelievable volume.
- Power handling (continuous) - 300 watts
- Nominal impedance - 3 ohm
- Sensitivity - 97db SPL with 1 watt of power (2.83 volts) measured at a distance of 1 meter in free air
- Sold as a pair (includes two of what is shown in the image)
- (2) 8” Skylon audio mid-bass driver for accurate reproduction of lower frequencies
- (2) 1” coaxially mounted compression horn drivers
- Neutrik Speakon connectors for reliable quick release wiring
- Dura-tech acoustically engineered composite enclosure for low resonance and light weight
- Collar mounting system fits 1.5” - 2.875” tubing for a secure fit without damage to the tower’s finish
Rubicon 350
This is a very high output precision loudspeaker that utilizes
an 8” woofer and a 1” compression horn driver. Very high sensitivity
is one of the hallmarks of this speaker. Numerous prototypes
and designs were evaluated to insure that this speaker would
not only be loud, but be exceedingly musical! You can listen
to these loudspeakers for hours at very high levels with no
fatigue. An audiophile grade crossover is again used in the
design of this speaker.
- Power handling (continuous) - 400 watts
- Nominal impedance - 3 ohm
- Sensitivity - 97db SPL with 1 watt of power (2.83 volts) measured at a distance of 1 meter in free air
- Sold as a pair (includes two of what is shown in the image)
- (2) 8” Skylon audio mid-bass driver for accurate reproduction of lower frequencies
- (2) 1” compression horn drivers
- Neutrik Speakon connectors for reliable quick release wiring
- Dura-tech acoustically engineered composite enclosure for low resonance and light weight
- Collar mounting system fits 1.5” - 2.875” tubing for a secure fit without damage to the tower’s finish
Rubicon 100 IB In-boat Speakers
- High quality two-way coaxial design
- Premium polypropylene cone material
- High power handling
- High quality capacitor
Engineered "IN BOAT" for best Marine sound (unlike other CAR audio speakers)
Design is in harmony with Skylon Rubicon series tower speakers to provide an accurate "System match".
"Voicing" and final design of INBOAT speakers was done in actual boats with tens of thousands of dollars of audio measurement equipment. This plus many hours of listening and evaluation created a seamless blend of music between the tower speakers and the INBOAT speakers.
Skylon system engineering assures that your boat will not only have the best sound on the lake, but also the best sound IN your boat. Why mix a tower speaker design with a car audio design.
R125IB
- Premium quality two-way coaxial design
- Uses precision soft dome tweeter
- Multi element crossover improves woofer/tweeter integration
- Increased power handling
- Increased output with larger magnet structure
Engineered "IN BOAT" for best Marine sound (unlike other CAR audio speakers)
Design is in harmony with Skylon Rubicon series tower speakers to provide an accurate "System match".
"Voicing" and final design of INBOAT speakers was done in actual boats with tens of thousands of dollars of audio measurement equipment. This plus many hours of listening and evaluation created a seamless blend of music between the tower speakers and the INBOAT speakers.
Skylon system engineering assures that your boat will not only have the best sound on the lake, but also the best sound IN your boat. Why mix a tower speaker design with a car audio design?
10” Skylon Marine Audio Sub-woofer with enclosure
Designed and ported to deliver maximum bass response in any marine application. The Skylon 4 Ohm 10” High performance sub-woofer features a water resistant poly cone material and gold plated connectors to resist moisture and corrosion. With 250 watts continuous and 500 watt peak power handling this box delivers huge bass in any application. The custom ported enclosure is constructed with weather treated, resin sealed ¾” MDF. Marine grade carpet is used to completely seal the enclosure. Designed specifically for boats this sub-box delivers incredible bass in a slender wedge shape to fit almost anywhere.
tower wire harness
The Skylon 4-pin and 8-pin Wire Harnesses are a necessity for wiring speakers or lights on any tower. Quick release connectors make wiring a snap!
rca cable
Gold plated contacts for corrosion resistance, marine compliant cable. Compatible with most RCA audio ports. RCA cables come in the following lengths:
- 3’
- 6’
- 18’
portable mp3 player cable
Gold plated contacts for corrosion resistance, marine compliant cable. Compatible with most portable audio devices. MP3 cables come in the following lengths:
- 3’
- 6’
- 18’
Skylon Marine audio wire
Skylon Marine audio wire available in bulk:
- Speaker wire
- Power wire
- Remote wire
Shipped in spools only.